Forged Brass Ball Valve

Screwed Female Ends to IS 554 / BS 21 / ISO 7.
Full Bore, Two Piece Design.
Quarter Turn, Lever Operated.
Provided with Forged Brass Hard Chrome Plated Ball.
Premium Quality PTFE Gland Packing and Seating.
Chrome Finish.

Bronze Compact Pressure Reducing Valve

Screwed Female Ends to IS 554 / BS 21 / ISO 7.
Piston operated, hence more reliable than conventional diaphragm type PRV.
Compact size, easy to Install.
Diaphragm-less, Piston Type.
Demands low maintenance and virtually noiseless.
Provided with Premium Quality Nitrile Rubber ‘O’Rings.

Bronze Gate Valve

Screwed Female Ends to IS 554 / BS 21 / ISO 7.
Screwed in Bonnet, Inside Screw, Non-Rising Stem, Integral Seat, Solid Wedge.
Designed sheet metal handwheel for a firm grip and convenient operation.
Premium Quality PTFE Gland Packing.
Design Standard IS 778, Class-1.
Provision for re-packing under pressure.

Bronze Horizontal Check Valve

Screwed Female Ends to IS 554 / BS 21 / ISO 7.
Screwed in Bonnet, Integral Seat.
Permits flow in one direction and closes automatically if the flow reverses.
Metal Disc is mushroom shaped with spherical seating surface.
Meant for Horizontal Lines only.
Disc is guided in Body as well as in Bonnet.

Bronze Vertical Check Valve

Butterfly Valve

Design Standard IS 13095 / BS EN 593 (BS 5155).
Wafer Type.
Lever Operated.
S.G Iron construction.
S.G Iron disc which is accurately guided between the two stems.
Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.

Cast Iron Sluice Valve PN 1

Design Standard IS 14846 PN 1.6.
Bolted Bonnet, Inside Screw, Non-Rising Stem.
Rigid and Sturdy design.
Handwheel Operated.
Flange Ends as per IS 1538.

Cast Iron Y

Flanged Ends to BS 10 Table ‘F’.
Stainless Steel (S.S 304) perforated sheet screen ( Ø3 mm Perforation) is guided in body and cover.
Large screening area makes the strainer efficient in performance.
Minimum pressure drop inside the body due to streamlined body contours.

Forged Brass Air Release Valve

Screwed male end as per IS 554 / BS 21 / ISO 7.
Chrome plated forged brass body and cover.
Full bore.
Sleek in design, ease of installation.
Handy device used to release entrapped air in any piping system.